PRODUCT DESCRIPTION:
LePage® Poly Stucco® is a non-shrinking natural gypsum stucco for texturing interior surfaces. This plaster-based powder mixes easily with water and can be applied at any thickness without cracking.
RECOMMENDED FOR:
Applications over interior plaster, drywall, wood, acoustic tile, and above-grade concrete and masonry. Used to create unique and interesting designs on walls as an alternative to paint or wallpaper.
NOT RECOMMENDED FOR:
Exterior use; Very hot or dry conditions.
FEATURES:
• Holds sharp patterns without sagging
• Mixes easily with water; Apply at any thickness without cracking
• Can be applied by trowel, roller or sprayer
• Can be pre-tinted with latex paint or painted over
CLEAN UP:
Clean tools and excess stucco immediately with water. Dried stucco can be removed by scraping with a sharp edged tool.
LePage® QUAD® Advanced Formula Sealant has the widest range of colours in the industry. Henkel colour specialists work with building product manufacturers to ensure a perfect colour match. An unlimited variety of colours mean superior performance on every job.
For the perfect finish to a job well done, trust LePage® QUAD® Advanced Formula Sealant for new homes and remodeling projects.
HOW TO USE:
STEP 1:
Apply and dry between 16°C (60°F) and 30°C (86°F). Surfaces must be clean and free of loose material and wall coverings.
STEP 2:
Always use flat oil-based primer on wood surfaces and other surfaces which may bleed. Use flat oil or latex primer on dark surfaces or to seal fresh drywall. Allow primer to dry before application.
STEP 3:
Mix ratio is approximately 10 kg to 6.5 L of cold clean water. Add powder to cold water and mix to a thick, smooth and creamy consistency. Do not use warm or hot water because this will greatly decrease the working time.
STEP 4:
Prepare as much as can be installed within 30 to 60 minutes. The mix may be tinted to pastel colours by substituting latex paint for a portion of the water. Spread on surface using a trowel, stiff brush, roller or spray gun.
STEP 5:
Apply in sections, which can be overlapped while still wet (30 to 60 min). Finish by rolling in one direction only. Sections rolled in different directions will reflect light differently and may not appear exactly the same.
The First Complete & Compatible Window Installation System Offering an All-Around Better Way to Install and Replace Windows
Henkel offers OSI® WINTeQ™ Window Installation System, the first compatible window installation system. The new OSI® WINTeQ™ system helps take the confusion out of product selection and increases protection against homebuyers' biggest concerns: energy loss and water penetration.
Builders have been facing increased potential liability for mold and mildew caused by improper window installation. The OSI® WINTeQ™ system is designed to decrease the chance of failure due to using mismatched products, by offering one compatible system that provides three barriers of protection which helps solve the problem of moisture penetration, air loss and even product selection. Plus, Henkel offers a certified training program to window installers, the first of it's kind in the industry.
The OSI® WINTeQ™ system has simplified the process of selecting compatible, reliable products, making the installation and replacement window processes easy. With training and three brochures available outlining the steps for New Installation, the Sill Pan Method and Replacement Installation, Henkel is paving the way for proper window installation.
Download the Installation Manuals
Window Installation System Manual
Replacement Window Product Profile and Installation Guidlines
Products
LePage® TeQ::Flash™ Butyl Window Flashing
LePage® TeQ::Seal™ Window Flange Sealant
LePage® TeQ::Foam™ Window & Door Foam
LePage® WINTeQ™ TeQ::Foam™ Applicator Gun